NO HOT WATER? Follow These Simple Tips
NO HOT WATER? Follow These Simple Tips
Blog Article
We've found this article on How to Troubleshoot and Repair an Electric Water Heater below on the web and thought it made good sense to relate it with you on this page.
Lots of modern-day homes use an electrical hot water heater for their furnace, due to its comfort as well as convenience of use. However, just like any other electrical appliances, issues might emerge with its usage, unexpectedly. It can be truly irritating to awaken to a cold shower instead of a hot one or having your bathroom with water that isn't warm adequate or even too hot. Whatever the situation might be, hot water heater troubles can be fairly aggravating. Fortunately, we've made a list of possible solutions to your water heater problems. There are a number of aspects that might create most of these troubles, maybe a concern with the power supply, the electric burner, or the thermostat. Prior to doing anything, guarantee you turn off the main power supply for safety. Whatever the problem is, getting it fixed must not present excessive of a problem if you adhere to these steps:
Check Your Power Supply:
As standard as this might appear, it is extremely required. Without adequate power, your hot water heater will certainly not work. So the first thing to do when your water all of a sudden stops working is to validate that it isn't a power issue. Inspect if the fuse is blown out or the circuit breaker tripped. If the circuit breaker is the problem, just transform it on and off once again. Change any type of damaged or damaged fuse. Check the home appliance with power after these modifications to see if it's currently functioning.
Inspect the Heating Element in the Water Heater:
If it's not a power issue, then try having a look at your heating element if it is still working. Test each of your burner to ensure the issue isn't with any of them. If any of them is damaged, change that part and then check whether the warm water is back on.
Inspect Your Thermostat:
If your water heater still isn't working or the water appearing isn't hot sufficient, you might need to examine the temperature level settings on your upper thermostat. Make sure the circuit breaker is turned off before doing anything. Open the gain access to panel and press the red switch for temperature reset over the thermostat. This ought to help heat up the water. Turn the breaker back on and examine if the problem has actually been fixed.
Call A Specialist:
If after replacing all damaged parts and also resetting your temperature, the hot water heater still isn't working, you might need to speak to an expert plumber for a specialist opinion. The issue with your heater could be that the cold and hot taps have been switched over or it may be undersized for the quantity of hot water required in your house. Whatever the situation might be, a professional plumber would certainly help resolve the trouble.
Conclusion
Hot water heater problems are not always significant. A lot of them result from minor problems like a blown fuse or damaged heating element. Replacing the damaged parts must suffice. However, if you are still not able to address the problem, give a call to your nearby plumber ahead to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As a devoted person who reads on Hot Water Heater Repair, I imagined sharing that excerpt was really useful. Loved our article? Please share it. Let another person discover it. We treasure reading our article about No Hot Water — Water Heater Repair.
Course Detail
Report this page